-
-
Remove any debris from belts.
-
Blow any small debris and dust off belts with compressed air.
-
Check that the set screw of the belt pulley is firmly secured on the flat side of the motor shaft.
-
-
-
Refer to Prusa's Guide on adjusting belt tension.
-
Please remember to log this task when complete by
- Initialing the printer checklist, and
- Filling the printer maintenance google form. This can be accessed by scanning the QR code on either side or the room or by clicking this link here!
Please remember to log this task when complete by
- Initialing the printer checklist, and
- Filling the printer maintenance google form. This can be accessed by scanning the QR code on either side or the room or by clicking this link here!
Cancel: I did not complete this guide.
6 other people completed this guide.