v1.0

Major VersionM

by Cosimos Sivan Cendo

BK Precision DC Power Supply: Series and Parallel Modes

Written By: Cosimos Sivan Cendo
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

0

  1. Press Shift + Menu to access the settings menu Use the up/down arrow keys to scroll to the Coup (coupling) settings

    • Press Shift + Menu to access the settings menu

    • Use the up/down arrow keys to scroll to the Coup (coupling) settings

    • Use the left/right arrow keys and Enter to set the coupling

  2. Ser (series) will place the first two outputs in series, doubling the usable voltage This also allows you to have positive and negative voltage rails if you use the point in the middle of the two outputs as ground Par (parallel) will place the first two outputs in parallel, doubling the usable current

    • Ser (series) will place the first two outputs in series, doubling the usable voltage

    • This also allows you to have positive and negative voltage rails if you use the point in the middle of the two outputs as ground

    • Par (parallel) will place the first two outputs in parallel, doubling the usable current

    • Connect the outputs with wires as shown to use these modes

Finish Line

Author

Cosimos Sivan Cendo

Member since: 09/14/2020

2,683 Reputation

11 Guides authored

Team

TW: Staff Member of TW: Staff

172 Members

280 Guides authored

0 Comments

Add Comment