Skip to main content

v1.1

Minor Versionm

by Brian Shen

  1. Rotate button clockwise to release the E-Stop
    • Rotate button clockwise to release the E-Stop

    • Push in the E-Stop when changing tools or not in use

  2. Check to see if Inverter light is on. This will tell you if the machine is getting power.
    • Check to see if Inverter light is on. This will tell you if the machine is getting power.

    • Release the E-Stop

    • Press Start

    • To stop, push the E-Stop

  3. When the machine is on, use the knob to adjust spindle speed
    • When the machine is on, use the knob to adjust spindle speed

    • The gauge will display the current RPM

  4. Turn to Forward for Clockwise and Reverse for Counterclockwise
    • Turn to Forward for Clockwise and Reverse for Counterclockwise

    • Most Drilling operations are done clockwise

Finish Line

One other person completed this guide.

Brian Shen

Member since: 10/21/2021

141 Reputation

3 Guides authored

Team

FF: Trainees Member of FF: Trainees

3 Members

3 Guides authored

0 Comments

Add Comment