Skip to main content

v2.0

Major VersionM

by August Yannick Van Geertruyden

  1. Spray WD-40 on the bed you plan to de-rust
    • Spray WD-40 on the bed you plan to de-rust

    • Use an abrasive pad in either linear or circular motions with firm pressure to remove rust stains

  2. Grab the Isopropyl from the chemical cabinet Spray a healthy amount of Isopropyl onto the bed and wipe it off with either a shop towel, or a white rag
    • Grab the Isopropyl from the chemical cabinet

    • Spray a healthy amount of Isopropyl onto the bed and wipe it off with either a shop towel, or a white rag

    • Complete this step multiple times (minimum 2) until your cloth does not pick up grease/wd-40 on subsequent passes

  3. Grab the Crystal Clear Paste Wax from atop the chemical cabinet, as well as a Popsicle Stick and either a white rag or a cut up tee shirt Apply a light amount of paste (see pic 2) onto the rag and mix into the rag well Apply wax across the bed in a thin layer
    • Grab the Crystal Clear Paste Wax from atop the chemical cabinet, as well as a Popsicle Stick and either a white rag or a cut up tee shirt

    • Apply a light amount of paste (see pic 2) onto the rag and mix into the rag well

    • Apply wax across the bed in a thin layer

    • Let sit for 40-60 minutes

  4. Using a fresh rag or shop towel firmly wipe off the excess wax from the bed (OPTIONAL) If the bed was properly cleaned with Isopropyl you can use the debuffer for a better result, but is not necessary so long as the bed is waxed every one or two weeks
    • Using a fresh rag or shop towel firmly wipe off the excess wax from the bed

    • (OPTIONAL) If the bed was properly cleaned with Isopropyl you can use the debuffer for a better result, but is not necessary so long as the bed is waxed every one or two weeks

Finish Line

August Yannick Van Geertruyden

Member since: 8/22/25

1 Reputation

1 Guide authored

0 Comments

Add Comment