-
-
Spray WD-40 on the bed you plan to de-rust
-
Use an abrasive pad in either linear or circular motions with firm pressure to remove rust stains
-
-
-
Grab the Isopropyl from the chemical cabinet
-
Spray a healthy amount of Isopropyl onto the bed and wipe it off with either a shop towel, or a white rag
-
Complete this step multiple times (minimum 2) until your cloth does not pick up grease/wd-40 on subsequent passes
-
-
-
Grab the Crystal Clear Paste Wax from atop the chemical cabinet, as well as a Popsicle Stick and either a white rag or a cut up tee shirt
-
Apply a light amount of paste (see pic 2) onto the rag and mix into the rag well
-
Apply wax across the bed in a thin layer
-
Let sit for 40-60 minutes
-
-
-
Using a fresh rag or shop towel firmly wipe off the excess wax from the bed
-
(OPTIONAL) If the bed was properly cleaned with Isopropyl you can use the debuffer for a better result, but is not necessary so long as the bed is waxed every one or two weeks
-
Almost done!
Finish Line