v1.0

Major VersionM

by AdolfJerald Gregorio Accad

Belt and Disk Sander

Written By: Sarah Rosalinde Schaupp
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

Flags

0

  1. Safety goggles are required to work in the woodshop.

    • Safety goggles are required to work in the woodshop.

    • Ear protection is recommended, but not required.

    • Long pants and short sleeves are required.

    • NO GLOVES - they can get caught in the machinery

    • Closed toed shoes are required

    • Tie back long hair

  2. Hold the piece you are sanding against the fence. This will prevent it from being dragged along with the belt. The belt always moves towards the fence.

    • Hold the piece you are sanding against the fence. This will prevent it from being dragged along with the belt.

    • The belt always moves towards the fence.

    • Push the start button before you touch your piece to the belt.

    • The same start button starts both the belt and disk sander.

  3. The belt sander always spins counterclockwise, so hold your piece against the left side of the fence. Loosen the locking knob to angle the fence. This allows you to sand at an angle.

    • The belt sander always spins counterclockwise, so hold your piece against the left side of the fence.

    • Loosen the locking knob to angle the fence. This allows you to sand at an angle.

Finish Line

Author

Sarah Rosalinde Schaupp

Member since: 09/16/2021

982 Reputation

6 Guides authored

Team

TW: Staff Member of TW: Staff

172 Members

280 Guides authored

0 Comments

Add Comment