Parts
No parts specified.
-
-
The main places to clean up are between the vice, the table, under the table, and behind the clamp.
-
-
-
Use a brush and compressed air nozzle to clean out the chips inside the vice
-
-
-
Grab the vacuum attached to the Belt Sander/Disc Grinder
-
Use it to clean up the chips on the table
-
-
-
Use a brush to clean underneath the table
-
Don't forget to clean the back of it behind the machine as well!
-
-
-
Use the vacuum to clean the chips behind the vice
-
-
-
Use a broom and dustpan to clean the floor and general area
-
Be sure to clean behind the machine as well!
-
-
-
The machine and floor should be clean now!
-
NOTE: Be sure to plug the vacuum back into the belt sander when finished!
-
Almost done!
Finish Line
