Skip to main content

v1.1

Minor Versionm

by Stephanie Do

  1. The main areas to clean include the table, the vice, the wall in the back, and the tray underneath. The main areas to clean include the table, the vice, the wall in the back, and the tray underneath. The main areas to clean include the table, the vice, the wall in the back, and the tray underneath.
    • The main areas to clean include the table, the vice, the wall in the back, and the tray underneath.

  2. Use a steel wire brush (there should be one on the lathe) to sweep the chips into the tray below (through the holes) or on the ground Use a steel wire brush (there should be one on the lathe) to sweep the chips into the tray below (through the holes) or on the ground Use a steel wire brush (there should be one on the lathe) to sweep the chips into the tray below (through the holes) or on the ground
    • Use a steel wire brush (there should be one on the lathe) to sweep the chips into the tray below (through the holes) or on the ground

  3. Continue to use the steel wire brush to brush the chips off the back of the wall into the tray underneath Continue to use the steel wire brush to brush the chips off the back of the wall into the tray underneath
    • Continue to use the steel wire brush to brush the chips off the back of the wall into the tray underneath

  4. Use the steel wire brush to collect all the chips and shavings into the corner of the tray Use paper towels to pick up and dispose of the lathe chips
    • Use the steel wire brush to collect all the chips and shavings into the corner of the tray

    • Use paper towels to pick up and dispose of the lathe chips

  5. Put away all tools used (including drill bits, calipers, etc.)
    • Put away all tools used (including drill bits, calipers, etc.)

  6. Use a broom and dustpan to sweet up any remaining chips in the area
    • Use a broom and dustpan to sweet up any remaining chips in the area

  7. The machine and floor should be clean now! The machine and floor should be clean now! The machine and floor should be clean now!
    • The machine and floor should be clean now!

Finish Line

One other person completed this guide.

Stephanie Do

Member since: 09/06/2023

1 Reputation

6 Guides authored

Team

TW: Staff Member of TW: Staff

176 Members

276 Guides authored

0 Comments

Add Comment