-
-
On the Maintenance screen of the printer, navigate to Cleaning -> Vacuum Material Reclamation Sieve. Click to begin the process on the screen.
-
Allow for the machine to initialize for 2 minutes.
-
-
-
Open Drawer B2. The latch is wonky so it's ok to force it open, you won't break it more than it already is.
-
Vacuum out all of the powder from Drawer B2.
-
-
-
Open Cabinet X and unlatch the box. Remove the filter from inside.
-
Tap the filter on the floor continuously until no more powder falls out. Vacuum the filter with the brush attachment. Then vacuum the loose powder off the floor.
-
Vacuum out the emptied filter box until no powder remains inside. Then put the cleaned filter back inside.
-
-
-
Close Drawer B2 and Cabinet X. On the printer's touchpad, click on Finish to complete the maintenance.
-
