Introduction
This guide demonstrates the steps to handle nozzle jams on the Ultimaker 2+ or 3.
-
-
Look for kinks or tangles
-
-
-
In the Ultimaker menu on the printer
-
Select "Material"
-
Select "Move"
-
-
-
Once the printer has heated up, rotate the button to push the material through
-
You can push on the material if you need extra force
-
-
-
If the previous steps did't work
-
Unload the filament
-
Remove the nozzle and clean separately
-
Return nozzle after it has been cleaned
-
Almost done!
Finish Line
