Introduction
After each print ink and agent gets on the bottom of the printhead. It must be cleaned after each print.
Tools
Parts
No parts specified.
-
-
Texpad wipes can be obtained from the Connex cabinet (will need multiple)
-
-
-
Move the print carriage to the center of the bed
-
Take a Texpad and dampen it with IPA
-
Start on the right and wipe the underside of the print carriage. Continue to do this until no more ink comes off
-
There is a quarter inch lip about 3 inches in on the underside of the print carriage - do not go passed this
-
Do the same process on the left side (will have less ink) and return the print carriage to the rightmost side
-
