| Injection Unit | ||
| Screw Diameter | mm / inch | 24 / 0.95 |
|---|---|---|
| Screw - L/D-ratio | 22 | |
| Max. stroke volume (theoretical) | in^3 | 2.21 |
| Max. shot weight in PS (theoretical) | oz | 1.16 |
| Injection Force | US Tons | 7.24 |
| Injection Flow (Theoretical) | oz/s | 2.05 |
| Max. spec. injection pressure | psi | 21,103 |
| Max. screw stroke | mm/inch | 80 / 3.15 |
| Nozzle force/contact pressure | US Tons | 5.28 (HV = 3.96) |
| Nozzle retraction stroke | mm/inch | 180 / 7.09 |
| Screw torque | ft/lbf | 132.7² / 213.90² |
| Screw speed (infinitely variable) | rpm | 400² / 250³ |
| Screw pullback force | US Tons | 3.37 |
| Heating power (nozzle + cylinder) | W | 5800 |
| Hopper Capacity | US gal. | 3.4 |
| Clamping Unit | ||
| Clamping Force | US Tons | 24.2 |
| Distance between tie bars | inch | 10.0 |
| Max. daylight between platen | mm / inch | 400 / 15.75 |
| Max. opening stroke | mm / inch | 200 / 7.87 |
| Min. mould height | mm / inch | 200 / 7.87 |
| Max. mould weight on moveable clamping side | lb | 331 |
| Mould opening force | US Tons | 4.4 |
| Mould closing force | US Tons | 1.94 |
| Ejector stroke (max.) | mm / inch | 80 / 3.15 |
| Ejector force pushing / pulling | US Tons | 2.0 / 1.32 |
Wiki ID: 676
Author: Zachary Cooper Friedman-Hill
Release: v1.1 [Minor]
Revision ID: 3507
Revision Date: 11-01-24
