Greasing

Make sure E-Stop is engaged and power is off

This panel can be found on the bottom left of the machine on the front side

Put on safety glasses

The gun can be found in the yellow metal cabinet at the front entrance

Remove ring lock on handle

Make sure everything on the nozzle is tightened as shown. No threads are visible.

Second image shows correct setup

Insert nozzle into place as shown. Make sure the nozzle is centered with the ball and is in completely.

Pump the grease by gripping the handle together.

Grease should flow out on the side with the blue circle.

The amount shown is adequate, stop pumping when you reach this point

7 total places to grease in the front, numbered in blue

4 grease locations in the back, making 11 total for the entire machine

Locations 10 and 11 are under the scrap tray.