-
-
Move the tab to the right, and pry open the clear plastic cover. Then fish out bobbin.
-
-
-
(OPTIONAL) Remove thread from bobbin if it doesn't have the colour you want.
-
If it does have the colour you want skip to Part 3.
-
If it doesn't have any thread go to the next step
-
-
-
Place the spool on the grey peg on top of the sewing machine. hen push the entire assembly to the right to engage the system.
-
Then push the spool to the right to engage the system
-
-
-
Open the thread spool holder. you should hear a click.
-
Place the spool on the holder.
-
Then secure it loosely with the top hat that is kept on the back of the spool holder.
-
-
-
Route the thread through the system. there is a picture on the top of the machine to show how. (follow the dashed line)
-
-
-
Insert wisdom here.
-
-
-
Insert wisdom here.
-
-
-
Insert wisdom here.
-
-
-
Thread the thread through the hole. And hold the string vertically.
-
Make sure there is a slight amount of tension in the thread.
-
-
-
Slowly press on the pedal to start winding
-
Make sure you hold on to the string!!!
-
-
-
Unload the bobbin
-
