Skip to main content

v1.0

Major VersionM

by Thomas James Rotello

  1. Ensure someone is sitting at the front desk at all times Keep the front desk clear of dust/debris/ put tools away Power on water jet computer
    • Ensure someone is sitting at the front desk at all times

    • Keep the front desk clear of dust/debris/ put tools away

    • Power on water jet computer

    • Turn on Datron and Start warm up cycle

  2. Check Papercut and Ticketing System
    • Check Papercut and Ticketing System

    • Sweep the floor as needed

    • Dust off tables and machines as needed, keep spaces neat and clean

    • Ensure tools not being used are in their proper place

    • Assist with walk-ins and phone calls (create a ticket if question needs further assistance)

  3. Run nozzle flush on Protomax Put all hazardous materials to their appropriate place (IPA & acetone in fire cabinet) Check all machines are turned off with E-stop engaged
    • Run nozzle flush on Protomax

    • Put all hazardous materials to their appropriate place (IPA & acetone in fire cabinet)

    • Check all machines are turned off with E-stop engaged

    • Put Horizontal saw all the way up

    • Turn off all lights

    • If trash bin is full, bring trash cans to outside door of lab

    • Close all interior/exterior doors and check that they are locked

Kenny Davis Jr

Member since: 11/14/2019

2,726 Reputation

23 Guides authored

Team

TW: Staff Member of TW: Staff

173 Members

284 Guides authored

0 Comments

Add Comment