Skip to main content
Products at Terrapin Works
Contents
  • Digital Fabrication
    • Additive
      • 3D Systems ProX DMP 200
      • Desktop Metal Shop
      • Dremel 3D45
      • Formlabs Form 2
      • Formlabs Fuse 1
      • HP Jet Fusion 580
      • MakerGear M3-ID
      • Markforged Mark Two
      • Prusa i3 MK3S
      • Raise3D N2 Plus
      • Stratasys Fortus 400mc
      • Stratasys Objet500 Connex3
      • Ultimaker 2 Plus
      • Ultimaker 3
      • Zortrax M200
      • Zortrax M300
    • Subtractive
      • Glowforge Pro
      • Dremel Laser Cutter
      • Epilog Laser Fusion M2
      • Kern LaserCell 50
  • 3D Scanning
    • Benchtop Scanners
      • Keyence VR-3200
      • Romer Absolut Arm
    • Portable Scanners
      • Artec Space Spyder
      • Artec Leo
  • Electronics
    • LPKF PCB Prototyping
      • Guides
      • Wikis
  • BackTerrapin Works

Dozuki System Automated Release

Minor Versionm

08/17/2022 by Dozuki System

Release Notes

This release was created automatically because the wiki predates the "Wiki Version Control" feature.

Printed Copies Are Uncontrolled

Wiki ID: 433

Author: Chinmay Kandarp Sevak

Release: Dozuki System Automated Release [Minor]

Revision ID: 2499

Revision Date: 09-30-21

Products at Terrapin Works

All of the information related to products at Terrapin Works (WIP)

Digital Fabrication

Additive

3D Systems ProX DMP 200

Guides

Guide thumbnail 00. PPE and Safety
Guide thumbnail 01. ProX 200 Menus
Guide thumbnail 02. Powder Management: Cleaning, Recycling and Loading
Guide thumbnail 03. Build Preparation
Guide thumbnail 04. Lens Cleaning
Guide thumbnail 05. Harvesting Build
Guide thumbnail 06. Support Removal (Bandsaw)
Guide thumbnail 07. Full Build Complilation
Guide thumbnail DMP ProX Manufacturing Software Usage
Guide thumbnail Pro-X Versaflo PPE Equipment

Wikis

3D Systems ProX DMP 200 {DMP}
3D Systems ProX DMP 200 {DMP}

Desktop Metal Shop

Guides

Guide thumbnail Desktop Metal Shop: Cleaning the Drying Oven
Guide thumbnail Desktop Metal Shop: Cleaning Off Prints
Guide thumbnail Desktop Metal Shop: Cleaning The Powder Station
Guide thumbnail Desktop Metal Shop: Cleaning the Printer
Guide thumbnail Desktop Metal Shop: Donning and Doffing PPE
Guide thumbnail Desktop Metal Shop: Filling the Vacuum
Guide thumbnail Desktop Metal Shop: Introduction
Guide thumbnail Desktop Metal Shop: Metal Powder Safety
Guide thumbnail Desktop Metal Shop: Powder Workflow
Guide thumbnail Desktop Metal Shop: Preparing the Printer to Print
Guide thumbnail Desktop Metal Shop: Prepping a Sinter Run
Guide thumbnail Desktop Metal Shop: Removing a Print from Printer
Guide thumbnail Desktop Metal Shop: Removing Overflow Keg
Guide thumbnail Desktop Metal Shop: Slicing in Fabricate
Guide thumbnail Desktop Metal Shop: Starting a Sinter Run
Guide thumbnail Desktop Metal Shop: Starting the Drying Oven
Guide thumbnail Desktop Metal Shop: Cleaning out Vacuum

Wikis

Dremel 3D45

Guides

Guide thumbnail Dremel 3D45: Harvesting
Guide thumbnail Dremel 3D45: Starting a Print

Wikis

Dremel 3D45 Troubleshooting
Dremel 3D45 Troubleshooting

Formlabs Form 2

Guides

Guide thumbnail Form Wash and Form Cure Station Maintenance
Guide thumbnail Formlabs Form 2: Cleaning the Optical Window
Guide thumbnail Formlabs Form 2: Starting a Print
Guide thumbnail Formlabs Form Machines: Harvesting a Print
Guide thumbnail Formlabs Form 2: Changing Resin Cartridge and Tank
Guide thumbnail [DEPRECATED] Formlabs Form 2: Wash and Cure Station

Wikis

Formlabs Form 2 Troubleshooting
Formlabs Form 2 Troubleshooting

Formlabs Fuse 1

Guides

Guide thumbnail Formlabs Fuse 1 Menus
Guide thumbnail Fuse Sift Operation
Guide thumbnail Maintenance Tasks
Guide thumbnail Preparing the Fuse to Print
Guide thumbnail Slicing and Software Operation

Wikis

Formlabs Fuse 1 {SLS}
Formlabs Fuse 1 {SLS}

HP Jet Fusion 580

Guides

Guide thumbnail Replacing Agents
Guide thumbnail Replacing Air Exhaust Filter
Guide thumbnail Replacing Air Intake Filter
Guide thumbnail Cleaning Air Filters
Guide thumbnail Replacing Deionized Water
Guide thumbnail HP Jet Fusion 580: Introduction
Guide thumbnail HP Jet Fusion 580: Quoting
Guide thumbnail Replacing Material Reclamation Filter
Guide thumbnail Printhead Alignment
Guide thumbnail Replace Printhead
Guide thumbnail Replacing Print-Area Filter
Guide thumbnail Replacing the Powder Cartridge
Guide thumbnail Scrape and wipe the fusing lamp
Guide thumbnail Vacuuming the Print Bed
Guide thumbnail Wipe Printhead
Guide thumbnail Wipe Recoating Roller

Wikis

HP Jet Fusion 580 {MJF}
HP Jet Fusion 580 {MJF}
Multi-Jet Fusion {MJF}
Multi-Jet Fusion {MJF}

MakerGear M3-ID

Guides

Guide thumbnail MakerGear M3-ID: Starting a Print

Wikis

MakerGear M3-ID: Troubleshooting
MakerGear M3-ID: Troubleshooting

Markforged Mark Two

Guides

Guide thumbnail Eiger: Advanced Slicing
Guide thumbnail Eiger: Getting Started
Guide thumbnail Markforged Mark Two: Changing the Fiber Reinforcement Filament
Guide thumbnail Markforged Mark Two: Adjust the XY offset
Guide thumbnail Markforged Mark Two: Bed Leveling
Guide thumbnail Markforged Mark Two: Harvesting
Guide thumbnail Markforged Mark Two: Starting a Print
Guide thumbnail Markforged Mark Two: Changing the Filament

Wikis

Eiger
Eiger
Markforged Mark Two {FFF}
Markforged Mark Two {FFF}

Prusa i3 MK3S

Guides

Guide thumbnail Prusa i3 MK3S: Changing Materials
Guide thumbnail Prusa i3 MK3S: Belt Tensioning
Guide thumbnail Prusa i3 MK3S: Changing the Nozzle
Guide thumbnail Prusa i3 MK3S: First Layer Calibration
Guide thumbnail Prusa i3 MK3S: Harvesting
Guide thumbnail Prusa i3 MK3S: Linear Rod Greasing
Guide thumbnail Prusa i3 MK3S: No Extrusion/ Under Extrusion
Guide thumbnail Prusa i3 MK3S: Preparing to Print
Guide thumbnail Prusa i3 MK3S: XYZ-Calibration

Wikis

Prusa i3 MK3S Troubleshooting Wiki
Prusa i3 MK3S Troubleshooting Wiki
Prusa i3 MK3S {FFF}
Prusa i3 MK3S {FFF}

Raise3D N2 Plus

Guides

Guide thumbnail Raise3D N2 Plus: Changing Filament
Guide thumbnail ideaMaker: Slicing
Guide thumbnail Raise3D N2 Plus: Harvesting
Guide thumbnail Raise3D N2 Plus: Starting a Print

Wikis

ideaMaker
ideaMaker
Raise3D N2 Plus Troubleshooting
Raise3D N2 Plus Troubleshooting

Stratasys Fortus 400mc

Guides

Guide thumbnail Fortus 400mc: Material Changeover
Guide thumbnail Fortus 400mc: Breakaway Support Harvesting
Guide thumbnail Fortus 400mc: Canister Recycling
Guide thumbnail Fortus 400mc: Changing Tips
Guide thumbnail Fortus 400mc: Introduction
Guide thumbnail Fortus 400mc: Post Print Maintenance
Guide thumbnail Fortus 400mc: Preparing to Build a Job
Guide thumbnail Fortus 400mc: Soluble Support Harvesting
Guide thumbnail Fortus 400mc: XYZ Offset Calibration
Guide thumbnail Inspecting the Tip Cleaning Assembly
Guide thumbnail Managing Prints with Control Center
Guide thumbnail Operating the CleanStation CSII
Guide thumbnail Preparing a Print in Insight
Guide thumbnail Fortus 400mc: Loading/Unloading Material
Guide thumbnail Using GrabCAD Print with the Fortus

Wikis

Stratasys Fortus 400mc {FDM}
Stratasys Fortus 400mc {FDM}

Stratasys Objet500 Connex3

Guides

Guide thumbnail Connex: Harvesting
Guide thumbnail Connex: PaperCut Use
Guide thumbnail Connex: Pattern Test
Guide thumbnail Connex: Recycle Cartridges
Guide thumbnail Connex: Roller Bath Cleaning/Inspection
Guide thumbnail Connex: Support Removal Solution
Guide thumbnail Connex: UV Calibration
Guide thumbnail Connex: Waste Disposal - ESSR
Guide thumbnail Connex: Wiper Cleaning
Guide thumbnail GrabCAD: Slicing
Guide thumbnail How to Label Waste
Guide thumbnail Connex: Material Replacement

Wikis

Ultimaker 2 Plus

Guides

Guide thumbnail Belt Tightening
Guide thumbnail Build Plate Leveling
Guide thumbnail Ultimaker 2+/3: Changing the Filament
Guide thumbnail Nozzle and Print Core Replacement
Guide thumbnail Nozzle Jams
Guide thumbnail Ultimaker 2+: Harvesting
Guide thumbnail Ultimaker 2+: Starting a Print
Guide thumbnail Ultimaker Cura: Getting Started
Guide thumbnail Z-axis Screw Greasing

Wikis

Ultimaker troubleshooting
Ultimaker troubleshooting

Ultimaker 3

Guides

Guide thumbnail Ultimaker 3: Changing the Filament
Guide thumbnail Ultimaker 3: Changing the Print Cores
Guide thumbnail Ultimaker Cura: Getting Started

Wikis

Ultimaker troubleshooting
Ultimaker troubleshooting

Zortrax M200

Guides

Guide thumbnail Zortrax M200/M300: Changing Filament
Guide thumbnail Z-suite: Slicing
Guide thumbnail Zortrax M200/M300: Harvesting
Guide thumbnail Zortrax M200/M300: Starting a Print

Wikis

Zortrax M200: Troublshooting
Zortrax M200: Troublshooting

Zortrax M300

Guides

Guide thumbnail Zortrax M200/M300: Changing Filament
Guide thumbnail Z-suite: Slicing
Guide thumbnail Zortrax M200/M300: Harvesting
Guide thumbnail Zortrax M200/M300: Starting a Print

Wikis

Subtractive

Glowforge Pro

Guides

Guide thumbnail Glowforge Pro Cleaning
Guide thumbnail GlowForge Pro Laser Cutting Guide
Guide thumbnail Laser Cutting with the Glowforge

Wikis

Glowforge Pro {Laser Cutter}
Glowforge Pro {Laser Cutter}

Dremel Laser Cutter

Guides

Guide thumbnail Basic Use of the Dremel Laser Cutter
Guide thumbnail Dremel Laser Cutter Maintenance
Guide thumbnail File Preparation for the Dremel Laser Cutter

Wikis

Dremel {Laser Cutter}
Dremel {Laser Cutter}

Epilog Laser Fusion M2

Guides

Guide thumbnail Adobe Illustrator: Basics
Guide thumbnail Adobe Illustrator: Preparing Files for the Epilog
Guide thumbnail Epilog Laser Fusion M2: Cleaning and Replacing Lens
Guide thumbnail Epilog Laser Fusion M2: Sending a File
Guide thumbnail Epilog Laser: Cleaning The Cutting Table
Guide thumbnail Epilog Laser: Preparing to Cut and Engrave
Guide thumbnail Epilog Laser: USB Driver Setup

Wikis

Laser Cutter General
Laser Cutter General
Packet of lens paper
Packet of lens paper

Kern LaserCell 50

Guides

Guide thumbnail CorelDRAW: Introduction
Guide thumbnail Kern: Advanced Kcam
Guide thumbnail Kern: Basic Operation
Guide thumbnail Kern: Introduction
Guide thumbnail Kern: Switching from Nonmetal to Metal

Wikis

Kern LaserCell 50 {Laser Cutter}
Kern LaserCell 50 {Laser Cutter}

3D Scanning

Benchtop Scanners

Keyence VR-3200

Guides

Guide thumbnail Keyence Microscopic 3D Scanner (Advanced Pt 2)
Guide thumbnail Keyence Microscopic 3D Scanner (Advanced)
Guide thumbnail Keyence VR-3200 Executing a Basic 3D Scan
Guide thumbnail Keyence VR-3200 Intro
Guide thumbnail Keyence VR-3200 Performing Basic Metrology
Guide thumbnail Keyence VR-3200 Software Features
Guide thumbnail Modeling Unseen Surfaces

Wikis

Romer Absolut Arm

Guides

Guide thumbnail Basic Post Processing in Geomagic Design X
Guide thumbnail Modeling Unseen Surfaces
Guide thumbnail Romer Absolut Arms Tutorial (Advanced)
Guide thumbnail Romer Absolut Arms Tutorial (Probing)
Guide thumbnail Romer Absolute Arm: Executing a Scan
Guide thumbnail Romer Absolute Arm: Preparing to Scan

Wikis

Portable Scanners

Artec Space Spyder

Guides

Guide thumbnail Artec Spider Scanning Tutorial
Guide thumbnail Post-Processing in Artec Studio

Wikis

Artec Leo

Guides

Guide thumbnail Artec Leo Tutorial (Advanced)
Guide thumbnail Artec Leo: Getting Started with Scanning
Guide thumbnail Modeling Unseen Surfaces
Guide thumbnail Post-Processing in Artec Studio

Wikis

Electronics

LPKF PCB Prototyping

Guides
Guide thumbnail Contac S4 Maintenance: Cleaning the Anode Plates
Guide thumbnail Contac S4 Maintenance: Filtering Bath 5
Guide thumbnail Contac S4 Maintenance: Refilling Chemicals
Guide thumbnail LPKF Intro
Guide thumbnail ProMask/ProLegend
Guide thumbnail ProtoMat S64
Guide thumbnail ProtoMat S64 Maintenance: Lubricating the Linear Rails and Collet
Guide thumbnail ProtoPrint S
Guide thumbnail Setting Up Prints with CircuitPro
Wikis
LPKF Troubleshooting
LPKF Troubleshooting
© 2022 University of Maryland, College Park · Web Accessibility